CONTENTS
|
 "Now we are confident that the Universe is formed from non-material primary substances which may be described as the 'shadow charge' that gives birth to all things." Shiuji Inomata and Yoshiyuki Mita, researchers |
|
TECHNICAL DESCRIPTION Physically the Searl Effect Generator (SEG)
consists of three concentric rings each made of a composite of four different materials
which are also concentrically attached to each other. The three rings are fixed to a base.
Surrounding each of the rings, and free to rotate around them, are rollers - typically 10
on the first ring, 25 on the next and 35 on the outer ring. Surrounding the rollers on the
outer ring are coils which are connected in various configurations to supply either AC or
DC current at a variety of voltages. Multiple magnetic poles are imprinted on the rings and rollers to form frictionless magnetic bearings. These also arrange the static charge into opposing charge clusters which cause the rollers to rotate around the circumference of the ring (as shown here). Some expressions currently in use to describe the source of the energy for the SEG are The Space Fabric, Quantum Energy field of Space or Zero Point Energy. This is an unlimited and constant source of energy which can be made to flow when the correctly proportioned masses concerned are stimulated by the correct frequencies creating an 'open system'. The idea of utilising this source of energy is currently the subject of various devices and experiments such as the 'Lamb shift', 'Casimir Effect' and the work of the Russian Nobel Prize winner Ilya Prigogine. However these devices and experiments tend to only prove the existence of the energy and not a method to create a coherent, ordered flow to produce useful power. 15 KW Searl Effect Generator (SEG) In contrast, John Searl has discovered that, in order to create a steady and stable flow, all the masses of the device (and the stimulating frequencies) must conform to precise values determined mathematically by the 'Law of the Squares'. A machine constructed to these principles produces a stable and useful power output.
A Linear motor operating on a magnetic bearing with the characteristics of an auto-transformer. The S.E.G. is defined as a device, which is constructed from 2,124 component parts, which make up 3 plates and 66 roller sets. 12 of the 2,124 components create the 3 plates, which act as reaction components. 2,112 components are employed to create 66 roller sets, which act as active components. Each roller set consists of 8 segments constructed from 32 components. Each segment cannot be less than 34 grams in weight, as the law of the squares defines that value as the lowest value suitable for the reasonable generation of electricity. Therefore the smallest roller set must weigh 272 grams, making a grand total of 2,244 grams per roller set for the smallest surface bound SEG. Tolerance <> 0.05 gram per roller set. The larger the error the greater is the loss of power within the unit. Therefore the total tolerance for the smallest SEG roller set must not be greater than 3.30 grams - above this factor the SEG will not function. For the best results, the tolerance across the total 66 roller sets should not exceed 0.05 grams. The S.E.G. is a step up rotary transformer. In fact it’s a 'three rotary transformers' operational system, within a unit. The inner transformer output is fed in to the input of the second plate which increases the output of the second unit, which output feeds as an input to the final unit, thereby increasing its final output to a very high voltage. Therefore the S.E.G. is just a prime mover for the production of clean electrical energy. The output windings must be designed to step down this output to 240 volts at 15Kw’s.
During 1968 it became clear that these magnetic
bubbles contained particles in a set manner and that there was a set
pattern to how many bubbles were present in the material. Because of this
finding I dropped the term magnetic bubbles, and replace it with the term
magnetic quantum material and released these details in a newsletter which
has since been reproduced in one of my books released a few
years ago. A
laboratory also agrees that somehow the material changes its state when
produced in this manner. When the SEG rollers are brought into close proximity to the SEG Ring, the Searl Effect resonant magnetic field causes negative ions and electrons to be drawn into and accelerated through the machine. This process is assisted by the highly electron-attracting rare earth metal Neodymium. The unique mechanical and material arrangement of the SEG pulses the neodymium to continually release and replace the surplus electrons to provide electrical or mechanical power, or both.
|
||
 |
||
|
|
Copyright © SISRC Ltd 1999 c1.htm |
DEFINITION
OF A SURFACE OPERATING S.E.G. (J. Searl) 15.09.00
Cross-section
of ring and roller